Victoria Vynn SINGLE-PHASE GEL in a bottle, Candy Pink, 15 ml

A single-phase gel in a bottle for shaping and extending nails, as well as for hardening the natural nail plate. No base coat is required. The gel ensures durability, wearability, and flexibility; it works with the natural nail plate, ensuring that the design does not crack or chip. The self-leveling formula allows you to build nails using a file-free technique. The gel can be used by nail technicians of any skill level.• 45 minutes is the average time required for a full application using this gel.• 30 minutes is the average time required for a gel refill.APPLICATION:• Construction and extension with shape correction.• Design and extension using a file-less technique.• Hardening/regeneration of the natural nail plate.Construction and Extension with Shape Correction1. Natural nails.Prepare the natural nail plate: shape it, buff it lightly, clean it, and degrease it.2. Apply Tape Bond and wait about 30 seconds.*3. Cut out the nail shape and adjust it to fit the free edge of the nail.4. Apply the gel to the nail and the nail form, shape the base, and cure for 10 seconds. Remove the nail form.5. Apply a thin layer of gel to the nail; do not cure it.6. Add more gel, shape the tip and form the nail. Let it dry.7. Wipe with an alcohol-based solution, then shape the nails to their final form using a 180/240-grit nail file.8. Blow off any dust, wipe it away, and clean it with an alcohol-based solution.9. Complete the planned design.**ATTENTION: After curing under the lamp, the gel is flexible.When forming the tunnel, keep it pressed together until the mixture has finished cooling.Design and Extension Using the File-Less Technique1. Natural nails.Prepare the natural nail plate: shape it, buff it lightly, clean it, and degrease it.2. Apply Tape Bond and wait about 30 seconds.*3. Cut out the nail shape and adjust it to fit the free edge of the nail.4. Apply the gel to the nail and the nail form, shape the base, and cure for 10 seconds. Remove the nail form.5. Shape the free edge of the nail.6. Apply a thin layer of gel to the nail; do not cure it.7. Add more gel, shape the tip and form the nail. Let it dry. Remove any excess dispersion layer with a dry cotton swab.8. Complete the planned design.**Hardening / Restoration of the Natural Nail Plate1. Natural nails.Prepare the natural nail plate: shape it, buff it lightly, clean it, and degrease it.2. Apply Tape Bond and wait about 30 seconds.*3. Apply a thin layer of gel to the nail; do not cure it.4. Add more gel, shape the tip and form the nail. Let it dry.5.A. If no changes to the form are needed, finish the design**B. If you need to correct the shape, clean the nail with an alcohol-based solution.6. Shape the nails to their final form using a 180/240-grit nail file.7. Bafojiet.8. Remove any dust and wipe it down with an alcohol-based solution.9. Complete the planned design.**10. Apply 5 Oils Complex.11. Result.* If you are dealing with a difficult nail plate, use Primer Acid.** Apply any hybrid polish and top coat, allowing each coat to dry.